The WPS button on Cox Panoramic router allows the user to connect devices to the network in a simple and efficient way.
In this article, we are going to provide a detailed overview of the Cox router WPS button, how it works, and why it is important to understand its functionality.
Since we are focusing on Cox Panoramic routers we are going to provide details about the following gateways:
- Technicolor CGM4981
- CommScope TG4482
- Technicolor CGM4331
- Technicolor CGM4141
These are all modem and router combinations that are compatible with Cox Internet service.
Key Takeaways:
- The WPS button on a Cox Panoramic router enables users to easily and securely connect devices to the Wi-Fi network.
- The WPS button is located either on the back of the router or on the top panel, depending on the Cox Panoramic model.
- The WPS button needs to be pressed for approximately two seconds to activate WPS pairing mode for about two minutes.
- WPS can only be used with WPS or WPA2 Personal encryption networks.
- The LED indicator light on the Cox Panoramic router will blink blue when the router is in WPS pairing mode and turn solid when the device successfully connects.
- It is better to keep WPS disabled and use other ways to connect devices to the Wi-Fi network or at least use it only when necessary and disable it after that.
What Is A WPS Button?
First, let’s see what WPS actually means. The WPS button on a router stands for “Wi-Fi Protected Setup.” The primary use of this button is to make the process of connecting new devices to the Wi-Fi network as simple as possible.
The purpose of the WPS button is to activate the WPS function and allow easy and secure connections between your Cox Panoramic router and your wireless devices, such as laptops, smartphones, tablets, and printers, without requiring you to enter a password.
Please note that the device you want to connect to the Wi-fi network has to support WPS too.
IMPORTANT:
- WPS will only work if your network is using WPS or WPA2 Personal encryption.
- Keeping the WPS button pressed for 1 minute will initiate the factory reset process. Make sure not to do that because all the custom settings will be erased and you will have to configure the router from scratch.
Where Is The WPS Button On My Cox Router?
Depending on the Cox Panoramic model the WPS button will be located either at the back of the router or on the top panel.
Technicolor CGM4981
The WPS Button on Technicolor CGM4981 is placed on the back of the gateway. It is a round button with two arrows pointing to each other.
CommScope TG4482
The WPS Button on CommScope TG4482 is placed on the back of the gateway. It is a round button above the ports.
Technicolor CGM4331
The WPS Button on Technicolor CGM4331 is placed on the back of the gateway. It is a round button with two arrows pointing to each other.
Technicolor CGM4141
The WPS Button on Technicolor CGM4141 is placed on the top of the gateway. It is a round button positioned in the left corner of the router.
How Do I Use WPS On My Cox Router?
When you press the WPS button on your Cox router, the router enters into WPS pairing mode for approximately two minutes.
During this time, you need to enable WPS on the device you want to connect to the network. The device will then look for a wireless signal, and once it finds the signal, it will establish a secure connection with your router.
When the router is in WPS pairing mode, the LED indicator light on your Cox Panoramic router will blink blue. After the device connects successfully, the light on the WPS button will turn solid.
If the LED indicator light does not blink blue or it doesn’t turn solid, it means the connection attempt has failed. If this happens, you can try again.
Here is a brief overview of the steps needed to connect a device to your Wi-Fi using WPS.
- Make sure the device you want to connect supports WPS connectivity.
- Press and hold the WPS button on the Cox Panoramic Router for approximately two seconds. Make sure not to hold it longer than 60 seconds or you will initialize a factory reset.
- You have two minutes to enable WPS on the device you want to connect. You can do it either by pressing the WPS button on the device or by enabling WPS in the settings.
- Wait for the connection to establish, indicated by a solid light on the WPS button on the router.
Is WPS Safe To Use?
Although the WPS button on the Cox Panoramic Router allows us to connect devices to the network quickly and easily, it is considered to be pretty unsafe.
Other ways to connect a device like manually entering the password or using a mobile app, are considered to be way more secure.
On top of everything, some devices may not support WPS, so make sure to check that before you try to use it.
Based on everything said it is better to keep WPS disabled all the time and use other ways to connect devices to your Wi-Fi network. Or at least use it only when necessary and disable it after that.
Frequently Asked Questions
The WPS button on Cox Panoramic modem looks like a round button. Some models have two arrows pointing to each other while others don’t have this symbol.
Yes. Your Cox Panoramic router has a WPS button but depending on the model it will be either placed at the back of the router (Technicolor CGM4981, CommScope TG4482, and Technicolor CGM4331) or on the top panel (Technicolor CGM4141).
Conclusion
Understanding what is the purpose of the WPS button and how to use it properly is important if you want to connect a new device to your Wi-Fi network without entering a password.
We did our best to explain the WPS button on Cox Panoramic Router, its purpose, and how it works. We also mentioned the exact location of the WPS button on different router models and how to use it properly. However, it is good to be aware of the possible security risks and keep this option disabled.
