Are you experiencing some problems with your Linksys Velop network? Is the solid or flashing orange light on your Linksys Velop causing you concern? You have come to the right place.
This blog post will help you understand the Linksys Velop orange light, why it appears, and how to fix it in a few easy steps. But first, let’s see what the orange light on your Velop device means.
What Does Orange Light On Velop Mean?
The Linksys Velop system uses color-coded lights to help users understand its current status.
Normally, the Linksys Velop light should be solid blue, which indicates that everything is working fine. However, when your Linksys Velop shows a solid orange or flashing orange light, it signals a problem with the connection.
Linksys Velop solid orange – Weak connection to another node. The node is out of range or it is having problems connecting to the other nodes in the network. This can cause reduced Wi-Fi performance.
Linksys Velop flashing orange – There’s a problem with your internet connection. The node cannot connect to another node or the Internet. It can result in limited or no Wi-Fi connectivity.
Now that we understand what causes the Linksys Velop orange light issue, let’s take a look at how to fix it.
How To Fix The Linksys Velop Orange Light Issue
Check Your Internet Connection
As we have mentioned, the Linksys Velop orange light can be a sign of an internet connection issue. In order to troubleshoot this specific issue, you can try connecting another device directly to the modem.
If the device doesn’t connect, it is possible that the issue is not with your Linksys Velop, but with your Internet Service Provider (ISP). This could be because of a service outage, or a technical issue on their end.
Check If An Outage Is Causing The Problem
As a next step, get in touch with your ISP to check if there is an outage in your area. They can run remote diagnostics, guide you through the troubleshooting steps, or schedule a technician visit if necessary. Always remember that your ISP is a key resource in maintaining a stable and secure internet connection.
You can also use sites like DownDetector to see whether other users are reporting issues with your ISP.
If there is an outage you will have to wait it out. After that, everything should get back to normal. However, if there is no outage, please try the following solution.
Move The Node Closer To The Other Nodes
If a node is out of range from the other nodes in your network, it might display an orange light. If you believe this is the case with you, try moving the problematic node closer to the others. If possible make sure to place the nodes in a way that there are no obstacles between them.
If this fixes the issue, it is recommended to place the nodes in different positions to make sure they are all within range.
Restart Your Linksys Velop Network
In order to troubleshoot any connectivity problems, it’s recommended to reboot your home network, including your modem and your Linksys Velop equipment.
Here’s the step-by-step guide:
- Unplug your modem and your Linksys Velop unit from the power supply.
- Allow the equipment to rest for 1-3 minutes.
- Plug in your modem and let it fully boot and stabilize.
- Once your modem is fully operational, plug in your Linksys Velop device and check your internet connectivity once it’s fully booted up.
If the Linksys Velop device still shows an orange light but there’s no internet connection, consider implementing the next troubleshooting method.
Reset Your Linksys Velop
If none of the above solutions work, you might need to factory reset your Linksys Velop. Here’s how:
- Find the reset button on the bottom of the node.
- Use a paperclip or similar tool to press and hold the reset button for 10 seconds. The node should change its color to red, then fade, and eventually start flashing bright red.
- Wait for the node to restart. The light should turn blue once it’s successfully reset and connected.
Remember to reconfigure your Linksys Velop settings after the reset.
Frequently Asked Questions
If your Linksys Velop’s light is orange despite having an internet connection, it could be due to the node being too far away from another node, causing a poor mesh connection. If the light remains orange after ensuring proper placement, consider resetting your Velop system.
While you can still use your Linksys Velop system when the light is orange, the performance may be degraded. The orange light indicates an issue with the connection, so you might experience slower speeds or intermittent connectivity.
Not necessarily. An orange light on your Linksys Velop system primarily indicates a connection issue, which can often be resolved by troubleshooting steps like checking cable connections, repositioning nodes, or rebooting the system. However, if the light remains orange despite these steps, it could potentially indicate a hardware problem, and you might need to contact Linksys support for further assistance.
Conclusion
The Linksys Velop orange light issue can be frustrating, but it’s usually easy to fix with a little patience and troubleshooting. If you’re still having trouble after trying the steps outlined in this post, don’t hesitate to contact Linksys Velop support. They are there to help and have the expertise to resolve any issues you are facing with your Linksys Velop system.
